sr

Wednesday, 21 November 2018

Single gates VARIO S

VARIO S single gate is used for the passages of above 1 m wide opening. The maximum width of the opening of this pedestrian gate is 3 m.

The bend-resistant frame of the Vario S gate is made from rectangular tubes of 60/40/2 mm diameter, is welded to the LEGI panel and then protected by zinc plating (hot-dip galvanization). LEGI panel used here consists of horizontal reinforced twin wires Ø 8 mm and vertical wires Ø 6 mm, with the 50 x 200 mesh spacing. Cross section of the posts (lowest is 100x100x3m) is changed depending on the size of the gate.

The possible width of wings ranges from 1000mm to 1250mm, and a maximum height of wings is 2400 mm.

It is possible to combine the LEGI Vario S gate system with different LEGI panels. On order, we can manufacture different sizes.

This construction is stable due to the strong links of LEGI posts with Vario S gates and specially patented LEGI cylinder locks.

The gate is normally opened to the inwards, but according to your wishes, it can be set to be opened to the outward. The direction in which gate opens (to the left or to the right) is determined by the position of the screws on the LEGI posts, to which the gate is attached. The posts of the VARIO gate can be installed both right and left and the gate sections are usable in both directions, opening outwards and inwards - very flexible. Even the connection strips for the fences can be screwed in on both sides. Opening direction of the gate can be decided during the installation itself. There is a possibility of changing the opening direction even for the already mounted wings. The design of the bottom latch, specially developed for LEGI Vario, significantly contributes to accident prevention because it is integrated into the gate frame and is blocked and inaccessible when the gate is closed.

In addition to the standard stocked gate section which ranges in height from 1,000 to 2,000 mm in the 200-grid and the gate section which ranges in width from 1,000 to 2,000 mm in the 250-grid, we also offer other sizes to match the LEGI fence systems. The section widths within a framework dimension can be combined.

 

Characteristics of LEGI VARIO S gates:

  • Accident prevention - no protruding parts
  • Various usage possibilities
  • Adjustable at any time (E.g. with lockable bottom catches, with deflectors, etc.)
  • Convenient storage - LEGI VARIO is series-manufactured and is therefore always available
  • Clear design, smooth lines, flush-fitting fronts
  • Special designs can be implemented (E.g. post infill, jagged edges)

All used steel parts are hot-dip galvanized according to DIN EN ISO 1461 European standard, and optionally colored by environmentally friendly powder coating, which makes elements resistant to UV radiation and prevents peeling and fading of the color.

 

Our standard colors are listed below. However, by order, we supply elements in all RAL colors.


 

 


Double and single-sided Vario S gate prospectus 
   pdf

Double and single-sided Vario S gate installation   pdf

 

 

 

 

linija

Fence systems

02

Designing

Constructions

Why LEGI?

linija

All of our products are highly functional, economical, elegant and easy to install. The uniqueness of the LEGI operations lies in professional service, special technology and long warranty on our high-quality products (from 10 to 20 years).

 

LEGI Certificates

linija

All LEGI products meet the standards of ISO 9001: 2015, from design, through production to galvanization and hot galvanizing as well as plastification.

legi sertifikati

 

           Contact 

linija

Address:  ul. Novo naselje 10
11000 Beograd
Phone: +381 11 8001 407
Fax: +381 11 8001 673

This email address is being protected from spambots. You need JavaScript enabled to view it.  |  www.legi.rs

PIB: 103934577   |  M.B.: 20054140
Ž.R.: 160-206926-98
Bank Intesa